Plants running · –:–:– IST Raipur, Chhattisgarh
Sales 0771-2443238 / 28 info@singhalsteel.com
SinghalSteel
Steel we make from the ground up.
Iron ore and coal go in at one end of our plants. TMT bars, wire rods, pipes and strips come out at the other. Nothing in between is bought in.
Singhal 500D TMT BarsWire RodsHB WireMS PipesMS StripsBilletsSponge IronSilico ManganeseSinghal 500D TMT BarsWire RodsHB WireMS PipesMS StripsBilletsSponge IronSilico Manganese
How to check the best TMT for your project
Six quick checks before you approve the steel for your site. Most take a minute, at the dealer’s yard or when the truck arrives.
Brand and grade rolled into a Singhal bar.
Pick the right grade
Fe 500D suits most homes and buildings. The “D” stands for higher ductility: the bar bends a long way before it breaks, which matters in earthquake-prone areas.
Look for the ISI mark and IS 1786
Genuine TMT bars carry the ISI mark with the licence number, the brand and the grade rolled into the bar at regular intervals.
Ask for the test certificate
Each lot should come with a mill test certificate showing chemistry, yield strength, tensile strength and elongation. Match it to the bars on your truck.
Check the weight
Weigh a few bars and compare them with the standard weight for that size. Underweight bars mean less steel than you paid for.
Look at the ribs
Ribs should be sharp, even and unbroken along the bar. They are what grips the concrete.
Bend a sample
A bend and rebend test on a sample piece should leave no cracks on the outside of the bend.
Eight products, all from our own steel.
Swipe through the range. Tap “Ask for a rate” and our sales desk replies on WhatsApp.
Singhal 500D TMT Bars
Fe 500D grade to IS 1786:2008, rolled from billets cast in our own melt shop.
Wire Rods
Rolled in coils at the Shyam Ispat unit, for wire drawing and fasteners.
MS Pipes
Mild steel pipes for structures, sheds, scaffolding and fabrication.
Billets
Cast in our induction furnaces and checked heat by heat before rolling.
Sponge Iron
Direct reduced iron from our rotary kilns, the feed for our melt shops.
Silico Manganese
Ferro alloy for steelmaking, made at the Singhal unit.
Photo credits: HB wire by Frank Vincentz, sponge iron by Borvan53 (CC BY-SA 3.0), billets by Jeremy Segrott (CC BY 2.0), via Wikimedia Commons. Placeholder photos until plant shots are supplied.
Watch how a Singhal bar is made.
A short film from our units: the kilns, the melt shop and the rolling mill, with the people who run them.
Sponge iron from rotary kilns
Billets from our induction furnaces
TMT bars off the rolling mill
Three units in Chhattisgarh, one chain of custody.
Singhal Unit
Where the group started. Sponge iron through to pipes and wire rods, plus ferro alloys. A blast furnace is planned here.
Shyam Ispat Unit
Five induction furnaces in the melt shop, a wire rod mill, and WHRB and CFBC power plants.
Gerwani Unit
Our newest unit, with a DRI plant, a TMT mill and a 65 MW power plant.
Run by the family that built it.
The Singhal Group is promoted by the Agarwal family of Raipur. The founder’s sons run it today, the same hands-on way he did: on the shop floor, close to the furnaces and close to the customers.
Late Shri Parmeshwar Das Agarwal
years in civil engineering and construction before he founded the group and set its first plant running.
Sanjay Agarwal
years in iron and steel. Runs the group with his brother.
Ajay Agarwal
years in iron and steel, across the group’s plants and operations.
Fe 500D to IS 1786:2008
Every TMT bar is rolled to the Fe 500D grade.
Our own melt shop
We cast our own billets, so the chemistry of the bar stays in our hands.
Captive power
Our own power plants keep the mills running steadily.
Tell us the sizes and the quantity. We will come back with a rate the same day.
Need the weight first? Use our TMT weight calculator.